Data centers

Why HVAC-R Technicians Make Great Data Center Critical Facilities Hires

By Bob Gates · November 17, 2026 · 6 min read

The United States had more than 3,000 operating data centers as of February 2026, with at least 1,500 more in development, according to Pew Research Center. The constraint is not only power and land. It is people.

A September 2026 DCD Intelligence workforce survey found that more than two-thirds of data center developers and operators were staffed below what their operations required. The shortages were most acute in facilities and physical infrastructure, and in power and cooling. Operators are already looking to adjacent technical fields to fill those seats.

That is the opening for commercial HVAC-R technicians, chiller-plant techs, chief engineers, and building engineers. Many already work with the mechanical systems a data hall depends on. They are not automatically critical facilities hires, but with the right screening they are often a better starting point than a general maintenance resume.

I’m Bob Gates, founder of Facility Talent. We recruit data center critical facilities talent nationwide, and we still search for HVAC-R and multi-site facilities people.

Why the usual “data center tech” posting comes up short

Ready-made critical facilities technicians and engineers are usually already employed, and every operator in the market is looking at the same short list.

The broader HVAC-R pipeline is tight. TechForce Foundation’s 2026 Technician Workforce Report put annual HVAC/refrigeration demand at about 41,000 openings, against roughly 23,000 program completions in the 2023–24 school year — a 36 percent unmet gap. Waiting for a perfect “data center only” resume means competing for a small pool while a larger, overlapping pool sits in commercial plants and central plants.

Job boards still have a place. Facility Talent Jobs lists data center openings and reviews employer submissions within 24 hours. Use a board post when the brief is clear and you can wait. Use a direct search when the seat is live-site critical, or you need people who are not applying.

What already transfers from HVAC-R and building engineering

Data center cooling is not comfort HVAC. It is also not a foreign language to a strong commercial technician.

Robert Vilches, a training specialist with the United Association, put the mechanical baseline this way in ACHR News: entering data center work requires “a strong background in customer service, hydronics, fluid dynamics, cooling towers, pumps, VFDs, electrical, and building automation systems.” Those, he said, are “everyday skill sets for most commercial technicians.”

That is the overlap we screen for:

  • Chillers, towers, and pumps. A tech who has started, staged, and recovered a chiller plant is closer to a data hall than a residential or light-commercial rooftop tech.
  • Building automation. Anyone who can trend a BMS/BAS point, chase a failed sensor, and explain a sequence has a head start on hall controls.
  • Refrigeration discipline. Rack technicians already work to tight setpoints, diagnose with gauges and controls, and live with on-call reality. That temperament matters when uptime is the job.
  • Plant operations. Chief engineers and building engineers who have owned a central plant, vendors, and documentation are often closer to a critical facilities seat than a single-building maintenance supervisor with a bigger title.

What does not automatically transfer

A strong commercial HVAC tech is not automatically a fit.

Change control is the usual break point. In a commercial building, a good tech often just fixes the problem. In a data hall, almost nothing is done without a written procedure and an approval. Vilches noted that some technicians struggle with that culture: “Nothing is done without approval, even something as simple as tightening a bolt on a leaking flange.” If a candidate bristles at MOPs, SOPs, and permits, the mechanical skill will not save the hire.

Electrical scope is next. Comfort with three-phase power, motor controls, and lockout/tagout is not the same as UPS, switchgear, generators, and mission-critical power. Be honest about whether the seat is mostly mechanical, mostly electrical, or both.

The cooling stack and the site also have to be named. A campus chiller plant does not automatically mean CRAC/CRAH or liquid cooling. Ask what they have actually run, then decide what you will teach. The work is often 12-hour shifts, nights, weekends, and a secured site with a background check.

Redundancy thinking matters too. Data halls are designed so one failure should not take down the load. Candidates need to talk in terms of N+1 or 2N, and what they would do if a unit dropped on a live floor — not only how they would get cooling back.

How to screen an HVAC-R or building engineer for a critical facilities seat

Treat the interview like a systems conversation, not a title match. Ask them to walk through a plant: equipment, the sequence, what failed, and what they did first. Listen for whether they owned the diagnosis or only replaced parts. Ask how they work with a BMS, whether they have followed a lockout procedure or method of procedure, and how they feel about waiting for approval when they already know the fix.

Ask about electrical comfort in plain language: what they have isolated, what they have been told not to touch, and whether they will work alongside a critical electrician rather than freelance on power gear. Ask about shift work, weekends, and a background check early.

Red flags: only residential or light-commercial rooftop work, no plant or controls depth, impatience with process, or a hard no on nights and weekends. Green flags: chiller or rack experience they can describe in detail, BAS fluency, a calm talk-through of a failure, respect for procedures, and a reason they want the work beyond a higher rate.

How to use this pipeline without lowering the bar

Do not relabel a comfort HVAC tech as a critical facilities technician. Name the gaps in the brief, and hire people who can close them. For a mechanical technician seat, a strong commercial chiller or controls tech can be the right hire with a planned ramp on CRAC/CRAH and site procedures. For a critical facilities engineer or manager, look for plant ownership and an operating rhythm, not only a service ticket.

Facility Talent is Phoenix-based and places these searches nationwide. Data center critical facilities is the lead practice. HVAC-R and multi-site facilities remain core work, and semiconductor facilities and equipment technician search is an emerging one. We screen for the systems people have actually run.

Employers: Start a search or post a data center role on Facility Talent Jobs. You pay only when you hire on a search. Fees typically run 20–30% of first-year total cash compensation (base salary plus target bonus and any sign-on bonus), depending on the role. Every placement includes a replacement guarantee of 60–180 days, depending on the role. A $5,000 priority search is credited in full toward the fee. Job posts are $149 for one 30-day listing, or $349 for a 3-pack, and are reviewed and posted within 24 hours.

Candidates: If you work in HVAC-R, building engineering, or critical facilities and want to be considered, submit a confidential background. Employers pay the fee. Candidates never do. To talk through a seat, call (602) 834-4850 or email bob@facilitytalent.com.

FAQ

Do commercial HVAC-R technicians really belong in data center critical facilities roles?

Often, yes — if they have commercial or plant experience, not only comfort or residential work, and if they can work under change control. The culture and electrical scope still have to be screened.

What should I look for first on an HVAC-R resume for a data hall?

Chillers, cooling towers, pumps, VFDs, and BMS/BAS beat a long list of rooftop brands. Then confirm shift fit and procedure discipline in the interview.

Is a building engineer or chief engineer a better fit than a service technician?

Service technicians often fit mechanical or HVAC technician roles. Building engineers and chief engineers are often the better path into critical facilities engineer or manager seats, because they have already owned a plant, vendors, and an operating rhythm.

When should we use a recruiter instead of posting the job?

Post when the brief is specific and you can wait. Use a specialty search when the role is live-site critical, or a board post has drawn the wrong experience. You can also post a data center listing on Facility Talent Jobs; we review and post submissions within 24 hours.

Do you only recruit data center talent in Phoenix?

No. Facility Talent is Phoenix-based and places nationwide.